Measurement of greater distances with measuring magnifiers is possible only to a limited extent due to the length of the scales. PEAK glass measuring rods are the optimum supplement for quick and simple determination of lengths and distances. The five lengths of 50 mm, 100 mm, 200 mm, 300 mm and 400 mm are supplied with a 15x reading magnifier (standard 1962 magnifier) in a transport box. When measuring lengths and distances care must be taken that the scale is parallel to the object to be measured, to prevent measuring errors. A test report is not included with 1972 glass measuring rods, which are produced in compliance with international standards.
On request, the glass rulers can be supplied with a calibration certificate for an additional charge. Glass rulers with measuring lengths of 50 mm, 100 mm, and 200 mm receive a DAkkS calibration certificate. The 300 mm and 400 mm lengths are only available in combination with a factory test report. If you also order a calibration certificate or factory test report, the delivery time will be extended by approximately 6-8 days due to laboratory processing times.
Technical data for glass scales 1972:
- Measuring scale: Graduation = 0.1 mm, inscribed 0 10 20 ... (mm)
- The graduation marks and numbers applied to the glass body are razor-sharp
- The graduation mark thickness is 0.010 mm
- Accuracy of graduation ± (0.001 mm + 8L / 1,000,000) (The dimensions refer to 20°C)
- Optical density: 3 ± 0.2
- Colour of the structure = black
- dpi: 50.000
- Coefficient of thermal expansion: 8.5 x 10-6 / 1K
- Humidity coefficient 0% per =% RLF
- Refractive index = 1.5195
- Material = Soda Lime Glass
- Good optical transmission - White, slightly greenish appearance
- Scale not centred - centred on glass body
- Length of glass body = see below
- Width of glass body = 25 mm
- Thickness of glass body = 2.8 mm
Available in lengths (measuring range of scale):
- 50 mm = total length 70 mm (± 1mm)
- 100 mm = total length 120 mm (± 1mm)
- 200 mm = total length 220 mm (± 1mm)
- 300 mm = total length 320 mm (± 1mm)
- 400 mm = total length 420 mm (± 1mm)
