Batteries for the electronics of versions V1 to V3 (type SR44) and versions V4 to V7 (type CR2032)

Push-button set incl. springs for plastic enclosures of versions V4 to V7

Stand axis for holding and positioning optics in the Z-axis with a toothed rack made of plastic

LED ring light RL5 IR - Ring light in infrared spectrum for working distances of 50 - 140 mm (optimum approx. 75 mm) in two clamping diameters

The LED ring light RL12 offers enormous brightness due to its twelve 3W LEDs and is designed for a working distance of 45 mm to 260 mm. The optimal illumination is at a distance of approx. 100 mm

These high-power, low-profile illumination units feature enhanced light conductivity

For diameter measurement of rotationally symmetrical parts or pitch measurement of screws and taps

Here you will find the replacement scales for the following measuring loupes: 2016, 2055, 2037, 2044 and 2066 in white.

Scale # 1 in black

Standard scale with graduation 0.1 mm in black

The 1996 loupe is a simple microscopic loupe with 30x magnification

The optics, identical to the PEAK Stand Magnifier 1961, are permanently mounted in a holder combined with an illumination, resulting in the Test Magnifier 1966

The lightweight 1960 test loupe, which has a high design for convenient assessment of surfaces with 5x magnification

Biconvex lens Ø 75.0 mm made of optical glass, ground and polished in 2 different magnifications; 6.0 and 10.0 dioptres

Biconvex lens Ø 30.0 mm - pack of 10 made of optical glass, ground and polished in different magnifications from 10 to 26 dioptres

PEAK watchmaker's loupe with glass lenses and metal housing and a headband, magnification 20x

LED illumination for crack magnifier RL-LED

USB camera system for process-safe and ergonomic measuring

Cleaning spray for Electronic Scale

The four metal rulers of the RL-1 series are supplied with a 10x reading magnifier. In addition, all versions are available as separate models with LED illumination - see RL-1-LED. The graduation is 0.1 mm