Made of opt. glass, ground and polished 10 lenses from Ø 12,5 mm 48 dioptres, up to Ø 40 mm 10 dioptres in one set

For tool mounting, use the precision chuck from Röhm with mounting device for the CT series tool measuring systems

1/3inch CMOS sensor, progressive scanning camera with integrated optical lens as well as digital, totally adjustable via OSD

Positioning system consisting of a cross table, rotary table and two precision guides

For the old models of microscopes with coaxial illumination series 2054-CIL a bulb for 3 volts is used

Plan PLi 2x/0.06 infinity corrected objective, working distance 7.5 mm

Titan Centering Microscopes have an upright image, optically correct from left to right so that the operator sees the workpiece with the microscope the same as without it, Mistakes due to transposing or converting are eliminated

Replacement scale for measuring magnifier FC-SRW-8 from F & C with graduation 0.1 mm as well as angles and radii

Dongle for activating the Metric measuring software when used with cameras not integrated in the Metric

The CV-ST stand is available in two versions. One base plate with and one without drilling patterns as well as precision guide 400 mm long and fine focus system

Bi-aspheric plastic lens Ø 72 mm - 12 diopters round injection moulded from PMMA (Plexiglas®)

Biconvex lens Ø 90.0 mm 4.0 dioptres made of optical glass, ground and polished

Steinheil single-vision loupe series with achromatic 3-lens system in different magnifications and diameters. These loupes are characterised by excellent colour error correction. Available in the magnifications: 7x, 14x and 20x.

PEAK watchmaker's loupe with glass lenses and metal housing and a headband, magnification 6.7x

LED illumination for crack magnifier RL-LED

Coordinate measuring display for precise position determination in up to 3 axes with touch display, including plug-in power supply, RS232, encoder, and USB cable

Depth measurement in microns via the lower and upper focus points. Display and transfer of results to Excel.

The camera systems for retrofitting machines, measuring systems and for special fixtures or as a replacement for profile projectors

Video microscope with precision stand and cross table 50 x 50 mm as well as with dimmable LED ring light and integrated LED bottom light

For high-precision depth measurements: The Cellcheck CIL-XY-Z as a mobile metallurgical microscope with 0.001 mm depth gauge and magnetic interchangeable objectives